Antiskid

Closed cell foam rubber antiskid (therefore it does not absorb water and is soft), resistant to UV rays, better grip guaranteed compared to traditional antiskid systems with the advantage of not wearing out wetsuits.
Technical characteristics: thickness 2,8 mm, weight 0,5 kg / m2, sheet size 1.9 x 1 m, to be glued with Bostik.
Price per sheet 30€+ vat

On request: different thicknesses (from 1.5 to 28mm), specific double-sided adhesive for fixing also in saline enviroment, cutting and / or surface edging according to a specific  drawing.
To improve even barefoot adherence, we recommend the use of CNC machined antiskid, with the possibility to customize your board or boat also with name, logo or sail number.

Clean the surface without sanding; define and cut the progrip according to the chosen design; mask the limits in which you will then apply the glue with masking tape, then spread the contact adhesive with a spatula on both surfaces, trying to apply a film of glue as thin as possible and taking care not to have any lumps, which could compromise a good result. Wait for the glue to dry (5/10 min.) Then spread a sheet of polythene to partially cover the area on the boat with the glue, then apply the progrip without pulling it, but spreading it from the inside to the outside, gradually removing the polythene up to a complete laying, then squeeze with a roll. In case of bubbles, pierce with a pin and then press. For best results, cut off the excess part when finished.